Job Summary; Settings; Tips - Multitech QuickCarrier USB-D User Manual

Settings-"4"

Tips

• It is very helpful to make use of the Job capabilities of the Omniguard
including the use of Job Names. When starting work at a new job site, touch
"START JOB" at the bottom of the main screen on the Omniguard and enter a
meaningful name for the job, such as the address. If "WAITING FOR
PRESSURE" or some other message is displayed at the bottom of the screen,
touch it to end the current job and then start a new one. This will make the
reports easier to identify since they all use the Job Name. The Job Summary
will also accurately reflect work done.

JOB SUMMARY

JOB:
1234 Jacksonville Ave N
START:
02-01-09 8:00
IN NORMAL OP:
23hr 46min
ALARMS:
12
IN ALARM:
59min 12sec
Omniguard 4
# G400000
SETTINGS
MEM EST DAYS LEFT:
100
DATE & TIME:
01-01 12:00
ALARM 1:
-0.025" WC
ALARM 2:
-0.050" WC
PRINTER: Off
Omniguard 4
# G400000