Table of Contents
Advertisement
ADDITIONAL SAFETY INSTRUCTIONS
1. Make sure the power switch on your tile saw is in the ''OFF'' position before plugging in.
2. Do not leave the tile saw unattended while it is running. Always return the power to the ''OFF'' position when not in use.
3. Always wear safety glasses, dust mask and ear protection when operating the tile saw.
4. Always remain alert when the tile saw is in use. Inattention on the part of the operator may lead to serious injuries.
5. Keep children away. All visitors should be kept at a safe distance from work area.
6. Always keep the blade guard in the down position while operating the tile saw.
7. Disconnect the tile saw from its power source before installing or changing blades and before cleaning or servicing.
8. Never stand on tool. Serious injuries could occur if the tool is tipped or if the cutting tool is unintentionally contacted.
9. Do not directly wash the bottom of the motor.
10. Do not force the material being cut. Always let the blade cut at its own speed.
11. Do not force the tool to do a job it isn't designed to do.
12. Make sure you use the correct blade for the job you are doing.
13. Do not alter the plug or use a two-prong receptacle. This tile saw is equipped with a three-prong electrical plug.
14. Keep your work space clear and free of all debris.
15. Keep the tile saw clean and maintained to achieve the safest and highest performance for each job.
Model ....................................................................................................................................................................................KC-3310TS
Voltage ............................................................................................................................................................................................120V
Horsepower ..................................................................................................................................................................................2.5 HP
Amperage ..................................................................................................................................................................................15 Amp.
No load speed ......................................................................................................................................................................4,500 RPM
Blade size ..........................................................................................................................................................................................10"
Reversible arbor flange sizes............................................................................................................................................................5/8"
Cutting capacity @ 90º ......................................................................................................................................................................24"
Cutting capacity @ 45º ......................................................................................................................................................................18"
Max. depth of cut ..........................................................................................................................................................................3-3/4"
Sliding table size with extension ..................................................................................................................................24-1/2" x 18-1/2"
Water tray size ................................................................................................................................................27-1/2" x 21-1/2" x 3-1/2"
Bevel cuts........................................................................................................................................................................................0-45º
Weight ........................................................................................................................................................................................105 lbs.
FOR SLIDING TILE SAWS
KEEP THESE SAFETY RULES FOR FUTURE REFERENCE
TILE SAW SPECIFICATIONS
Advertisement
Table of Contents
