Assembly - Husqvarna DT600 Operator's Manual

operated product, disconnect the HT lead
from the spark plug. If you have a battery
operated product, remove the battery.
WARNING: Always use protective gloves.
• Check the entire product before starting. Check that
all guards and covers are complete and fastened
securely. Check all nuts and screws.
• If you have a gasoline operated product, check that
there are no fuel leaks.
To assemble the attachment
B
A
E
The arrow on the gear housing indicates the direction of
rotation. The gear housing is to be placed as illustrated.
IMPORTANT:
The moss dethatcher rollers are marked with arrows
showing the direction of the rotation. Make sure the
moss dethatcher rollers are fitted correctly.
The moss dethatcher rollers must be fitted slightly
displaced in relation to each other. The moss dethatcher
springs should point in the same direction as the rotation
direction arrow shown on the gear housing.
743 - 002 -
C
B
D
• Replace damaged parts.
SAVE THESE
INSTRUCTIONS

Assembly

1. Press the left moss dethatcher (A) onto the left drive
shaft from the gear housing (E).
2. Fasten the moss dethatcher roller with split pin (B)
into the inner hole in the shaft.
B
C
A
B
C
A
231