JVC FS-SD5 Schematic Diagrams page 7

FS-SD5/FS-SD7/FS-SD9
Disassembly method
<Main body>
Removing the rear cover (See Fig.1)
1. Remove the ten screws A and the five screws B
attaching the rear cover on the back of the body.
Removing the right and left covers
Prior to performing the following procedure, remove
the rear cover.
1. Remove the four screws C attaching the side covers
on the bottom of the body.
2. Move the left cover backward and remove outward.
Also remove the right cover in the same way.
Removing the front panel assembly
Prior to performing the following procedure, remove
the rear cover and the side covers.
1. Remove the three screws D on the bottom of the
body.
2. Release two joints a and two joints b on both sides of
the body using a screwdriver and remove the front
panel assembly toward the front.
1-6
(See Fig.2)
(See Fig.3 to 5)
Left side
Fig.4 Joints a
Rear cover
A
B
A
C
Left cover
Bottom
Front panel assembly
Joints b
B
A
A
Fig.1
C
Right cover
Fig.2
D
Front panel assembly
Fig.3
Right side
Fig.5
B
A