Table of Contents
Advertisement
4. PRECAUTIONS & PREPARATIONS FOR
MEASUREMENT
1) Ensure that the batteries are connected correctly to their
snap terminals and placed in the battery compartment.
2) Select & push the correct Switch & button before marking
measurements
3) Place the Test Lead into the proper input terminal before
marking measurements.
4) Remove either of the test leads from the circuit under
test while changing the measurement function.
5) Operate the instrument only in the ambient temperature
range of 0 to 50 ( 32 to 122
than 80%Relative humidity.
6) Do not exceed the maximum rated voltage of each range
and input terminal.
7) Always switch the power to its " Off " position when the
instrument is not in use. Remove the batteries if not intend
to use the instrument for a long period of time.
5. MEASURING PROCEDURE
℃
℉
Caution :
* Do not apply the
overload voltage, current
to the input terminal !
10
) and less
Advertisement
Table of Contents
