Advertisement
IDENTIFICATION
4 Product Description
Product Description
The ID PM ECCO+ captures and stores barcodes and RFID data for a variety of uses and transmits those to
a host via USB connection, Bluetooth or WiFi. This document provides a basic instruction for using the
ID PM ECCO+ device.
Label
Description
1
Green LED
2
Yellow LED
3
Red LED
4
Blue LED
5
Key 1 (trigger button)
6
Key 2 (custom)
ID PM ECCO+
Fig. 1: ID PM ECCO+ device overview
Lights up green when ID PM ECCO+ is turned ON.
When the battery level is empty, it flashes every 2 sec.
(Further function can be user defined with the programming interface)
Lights up yellow if a barcode or RFID tag was read successfully.
Is flashing every 500 ms when connected to USB.
(Further function can be user defined with the programming interface)
Lights up red if connected to a battery charger (USB or power adapter).
Red = Battery charging
Off = Battery fully charged
Lights up blue when ID PM ECCO+ is connected to Bluetooth.
Is flashing every 500 ms while Wi-Fi is associated.
Is flashing every 3 s when Wi-Fi is connected.
(Further function can be user defined with the programming interface)
Triggers the barcode and/or the RFID reader.
(Further function can be user defined by Master Setup or with the
programming interface)
(This function can be configured by using Master Setup or with the
programming interface)
4 Product Description
Function
Page 9 of 24
Advertisement
