Feig Electronic PAN MOBIL ID PM ECCO+ User Manual page 13

IDENTIFICATION
6.4 Scanning
6.4.1 1D Laser
To scan a barcode follow the steps below:
1. Aim the scanner on the barcode.
2. Press the trigger key (5).
3. Ensure that the scanning line is directed straight on the barcode.
4. The ID PM ECCO+ beeps and the yellow LED (2) lights up to indicate a successful decode.
ID PM ECCO+
Fig. 2: Barcode Scanner Alignment
6 Operation
Page 13 of 24