Nikon Eclipse E600W Instructions Manual page 17

6
Mounting the pointer
Mount the pointer on the front side of the main observer section with the provided hexagonal
wrench. When a multi-viewing attachment for 10 persons is being used, mount the pointer on
the lower part (the front side of the MTH main splitter).
Be sure to use the AC adapter provided with the pointer.
<Attaching/replacing the lamp>
Allow the lamp to cool before replacing it. Before replacing the lamp, turn the arrow
brightness control counterclockwise as far as it will go to turn off the arrow and then unplug
the AC adapter plug from the wall outlet.
1 Push and turn the lamphouse cover approximately 45° counterclockwise to remove it.
2 Position the illuminating part of the lamp inward and insert the lamp into the socket.
3 Return the lamphouse cover to its original position. (Align the protrusion with the
16
Plastic cover
G
Pointer
AC adapter
notch and turn the cover clockwise as far as it will go.)
Illuminating part
Lamphouse
cover
Notch
To the power cord
G
R
Lamp
Protrusion
III. Assembly