Fireco Dorgard Pro Handbook page 19

Factory reset
Performing a factory reset is a way of returning the device
to its original system state by erasing all of the information
stored.
The reset restores the device to the original manufacturer
settings. Any connected devices will be unbound.
Dorgard Pro
Undo battery compartment and pull up to
disconnect power. Hold down the bind button
whilst reconnecting power until it beeps 3 times.
Transmitter & Repeater
Disconnect the power and remove one of the
back-up batteries. Hold down the blue bind button
whilst reconnecting the power until it beeps 3
times. Replace the back-up battery.
Freedor Pro
Remove the cover and disconnect the battery.
Hold down the bind button whilst reconnecting
30-60s
the battery until it beeps 3 times.
Troubleshooting
Scan to watch our
technical support video
x3
Dorgard Pro
!
x3
Page 17