Fireco Dorgard Pro Handbook page 14

Unbinding
If it is necessary to bind a child device to a
different parent you will first need to unbind it.
1. To start the unbind process, press and hold
the blue bind button on the base of the parent
Transmitter/Repeater. The radio LED will flash
amber indicating in unbind mode.
Dorgard Pro
!
3. When the unbind is successful the radio LED
will go solid amber on both parent and child for
4 seconds. The child will no longer be connected
but the parent remains in unbind mode for 1 hour
or until the bind button is pressed again.
Page 12
4
2. The pro device you wish to disconnect
now needs to be put into unbind mode.
This can be done by pressing and holding
the bind button.
On a Dorgard Pro it is accessed through the
front casing using a 3mm screwdriver.
The radio LED will flash amber to indicate
in unbind mode.
On a Freedor Pro this can be found on the
PCB, accessed by removing the cover.
4
Installation
!