Fireco Dorgard Pro Handbook page 17

Check
Check that the Transmitter or parent Repeater is in
bind mode, indicated by the radio LED flashing green.
Press the bind button on the Repeater. If the radio
LED stops flashing and turns solid green for 4
seconds, it has bound to the Transmitter or
parent Repeater.
!
OR
move the Repeater closer to the Transmitter or parent Repeater;
OR
bind the Repeater to a different Repeater;
OR
add another Repeater to your system to increase the coverage.
4
!
! Dorgard Pro
Fix
If problem persists, it is likely the Repeater is out of
range. We recommend you carry out a site
survey - see section 2.
Repeater
State
The Repeater is still flashing its top radio LED
green 1 minute after the bind button on the base
of the Repeater has been pressed down.
Troubleshooting
Page 15