17.1.1.2
To Remove Electronic Controller
6. Detach the earth wire screw, terminal wire (Brown),
terminal wire (Grey), terminal wire (Black), terminal wire (White),
terminal wire (Red) and earth wire (Green).
Figure 4
3 Hooks (Top, left & right side)
Figure 3
10. Detach all connectors as labled from the
electronic controller. Then pull out
electronic controller gently.
9. Pull out the electronic
controller halfway.
8. Remove screw to
remove terminal
board complete.
7. Remove the indicator complete then detach the
connectors CN-DISP and CN-RCV.
120
5. Remove the control board cover
by releasing the 3 hooks.
CN-STM2
CN-NANO
CN-STM1
CN-STM3
CN-DISP
CN-RMT
CN-RCV
CN-WLAN
Figure 5
CN-HT
CN-FM
CN-CNT
CN-TH