Siemens ACUSON S2000 Installation Instructions Manual page 34

34
4. Wait for the DVR system to complete its initialization.
5. Press the F12 key on the Control Panel keyboard. This will bring up the DVR menu on
the screen.
Fig. 36: DVR Menu
6. Record images.
a) Press the PW knob
adjust the image to get a color image. Make sure you get the Doppler strip at the
bottom of the image. Adjust the sound (top button, right side of Control Panel).
b) Press the DVR button
seconds of the image. The menu will change from "Ready" to "Recording".
c) Press the DVR button
7. View the images.
ACUSON S2000
NOTE
If the DVR Menu item on the monitor is greyed out, you may
need to reboot the system. Press the Power button on the
Control Panel to turn the system off, then press it again to
boot the system back up.
(9/Fig. 11 / p.
(4/Fig. 11 / p. 19)
(4/Fig. 11 / p. 19)
US15-101.812.01.02.02
05.10
System Delivery Procedure
19), then rotate the PW knob
to start the image recording. Record a few
to stop the image recording
Page 34 of 40
Ultrasound
(9/Fig. 11 / p. 19) to
Siemens