26
b) Press the Select key.
Fig. 23:
5. Rotate the 2D knob clockwise
the screen becomes brighter.
CAUTION
6. Press the Freeze button and disconnect the transducer from the left port.
Fig. 24:
Place the transducer in a safe place.
7. Press the Freeze button again to exit the Freeze mode and return to imaging.
Verify the Right Transducer Port
CAUTION
1. Press the Freeze button.
Fig. 25:
ACUSON S2000
(3/Fig. 11 / p. 19)
Connecting or disconnecting the transducers while in imag-
ing mode may affect the image.
Put the system in Freeze mode prior to connecting or
disconnecting transducers.
Connecting or disconnecting the transducers while in imag-
ing mode may affect the image.
Put the system in Freeze mode prior to connecting or
disconnecting transducers.
US15-101.812.01.02.02
05.10
System Delivery Procedure
to verify that the main display area of
Page 26 of 40
Ultrasound
Siemens