Siemens ACUSON S2000 Installation Instructions Manual page 27

System Delivery Procedure
2. Connect a transducer shipped with the system to into the right transducer port.
a) Roll the trackball to position the pointer over the Image on-screen button in the
lower-left corner.
b) Press the Select key.
Fig. 26:
c) Roll the trackball to position the pointer over the No Probe selection in upper-left
column.
d) Press the Select key.
Fig. 27:
e) Roll the trackball to position the pointer over the name of the connected transducer
from the transducer list.
f) Press the Select key.
Fig. 28:
3. Press the 2D knob
Siemens
NOTE
This activates the port the transducer is connected to and
unfreezes the image, returning to imaging mode.
(3/Fig. 11 / p.
US15-101.812.01.02.02
05.10
19).
Page 27 of 40
Ultrasound
27
ACUSON S2000