Table of Contents
Advertisement
24
5. Press the Freeze button and disconnect the transducer from the left port.
Fig. 18:
Place the transducer in a safe place.
6. Press the Freeze button again to exit the Freeze mode and return to imaging.
Verify the Center Transducer Port
CAUTION
1. Press the Freeze button.
Fig. 19:
2. Connect the transducer shipped with the system to the center transducer port.
a) Roll the trackball to position the pointer over the Image on-screen button in the
lower-left corner.
b) Press the Select key.
Fig. 20:
ACUSON S2000
Connecting or disconnecting the transducers while in imag-
ing mode may affect the image.
Put the system in Freeze mode prior to connecting or
disconnecting transducers.
US15-101.812.01.02.02
05.10
System Delivery Procedure
Page 24 of 40
Ultrasound
Siemens
Hide quick links:
Advertisement
Table of Contents
