Cleaning; Replacing The Fan - Kaco blueplanet 3.0 TL3 M2 WM OD IIG0 Operating Instructions Manual

NOTE
There are components in the housing of the device which may only be repaired by the customer service
team.
Do not attempt to repair faults that are not described here (in the chapter on troubleshooting and fault
rectification). Contact our customer service department. Only perform the maintenance work that is de-
scribed here.
The device should be checked for proper operation by a qualified electrician at regular intervals and if you
experience problems, you should always contact the system manufacturer service department.
8.2

Cleaning

8.2.1 Cleaning the housing
DANGER
Danger of death due to penetrating fluid
Serious injuries or death can result if moisture enters the system.
› Only use completely dry objects to clean the device.
› The device should only be cleaned from the outside.
CAUTION
Damage to the housing parts when using cleaning agents!
› If the device is contaminated, only clean the housing, cooling fins, housing cover, display and the LEDs
with water and a cloth.
WARNING! Do not use compressed air or high-pressure cleaners!
1 Use a vacuum cleaner or a soft brush to remove dust from the fan cover and from the top of the device on a regular
basis.
2 Remove dust from the ventilation inlets if necessary.
8.2.2 Cleaning the heat sink
NOTE
Refer to our service and guarantee conditions on our homepage.
ü The cleaning intervals must be adapted to match the ambient conditions of the installation location.
› In sandy environments, we recommend cleaning the heat sinks and fans every quarter.
8.3

Replacing the fan

KACO blueplanet 3.0 TL3 KACO blueplanet 4.0 TL3 KACO blueplanet 5.0 TL3 KACO blueplanet 6.5 TL3 KACO
blueplanet 7.5 TL3 KACO blueplanet 8.6 TL3 KACO blueplanet 9.0 TL3 KACO blueplanet 10.0 TL3
Page 25