Table of Contents
Advertisement
4. CD test mode
Turn off the power pressing Power operation button.
Press Power operation button while simultaneously while pressing " 8 " and " 5 " buttons.
To exit, turn off.
: Blink
z
Detale of the CD test mode
No.
Mode
1
Disc loading
Servo check
LD ON
FOCUS ON
CLV ON
2
TRACKING ON
SUB CODE
BER
3
Pickup movement
STOP Servo
4
5
All servo on
Adjustment value display
FOCUS BALANCE
FOCUS GAIN
TRACKING BALANCE
6
TRACKING GAIN
FOCUS OFFSET
TRACKING OFFSET
RFRP
7
Laser current is display
4.1. Disc loading mode
• Press the " 5 " button to open the tray.
• Set a disc on the tray, then press the " 5 " button again to close the tray. The disc is mounted automatically.
• Move the slide to the initially set position (10 mm towards the outside from the innermost position) and stop in this
status.
• Return to CD test mode.
Button / Operation
5
–
1 / 3
1 / 3
1 / 3
1 / 3
1 / 3
1 / 3
8 / 9
(while the button is pressed)
2
2 ＋ 5
2
(After "All servo on" state)
9
9
9
9
9
9
9
2
(Press more than 1second)
21
Hide quick links:
Advertisement
Table of Contents
