Cd Heart Run Mode - Denon DCD-720AE Service Manual

5. CD heart run mode

• Set the disc in the tray. Power operation button is turned to on while pressing the " 9 " and " 1 / 3 " button on this unit.
• If an error occurs, display the error and stop operation at that point. Number of operations held. See "Error display".
• Heat run count cleared when " 2 " button pressed.
Mode canceled and tray opened after " 5 " button pressed.
Detale of the CD heart run mode
No. Mode
1 Normal heat run
2 Chacking
Error display
3
5.1. Normal heat run
• The CD heat run mode is launched. Once writing of the TOC data is completed, press the " 1 / 3 " button. Count this as
the 0th heat run repetition.
q Play from the irst to last track on disc.
w If disc being used has less than 20 tracks, play all tracks. If disc has 21 or more tracks, skip to inal track after
playback of irst track has inished.
e After disc playback has inished, move pickup to innermost position and open tray.
r When loader open status detected, close tray again, re-read TOC and start playback from the irst track on the disc.
t The heat run repetition count is incremented (increased by 1) when the tray is opened.
y Conduct q to t repeatedly.
q , w Display during playback.
e
z XX:XX : No. of heat run repetitions
In cases other than when " 1 / 3 " is lights, same display as during normal playback.
5.2. Chacking mode
Start heat run mode, after TOC read, the Mechanism stopped, press " 2 " button.
Repeat the following.
TOC read
Sarch the irst track on disc.
Open tray.
Close tray.
• The heat run repetition count is incremented (increased by 1) when the tray is opened.
z XX:XX : No. of heat run repetitions
In cases other than when " 1 / 3 " is lights, same display as during normal playback.
Button / Operation
1 / 3
2
8 / 9
(while the button is pressed)
X X X X
X X X X
24