Test Mode - Denon DN-D4000 Service Manual

QQ
3 7 63 1515 0
SELECT knob
TE
L 13942296513

3. TEST MODE

Process No.
(TRACK
Indication)
A1 button
A2 button
www
.
http://www.xiaoyu163.com
Function
(Character-display)
Block Error Rate Check
Servo Check
Illumination Check
Adjustment Item
Focus Gain
Focus Balance
Focus Offset
Tracking Gain
Tracking Balance
Tracking Offset
* Reference data.
Function
(Character-display)
Heat Run
-
(H/R1Normal)
Chucking Test
-
(H/R2_Tray )
x ao
y
i
http://www.xiaoyu163.com
8
Loading a disc by OPEN/CLOSE button.
Press the PLAY/PAUSE button. B.E.R. is displayed.
"E.Rate_XXX XXX : Block Error Rate
You can select the track by the JOG DIAL.
Starts automatic servo checking when the SELECT knob is pushed.
Loading a disc by OPEN/CLOSE button.
"Lchk_Open" : Disc Tray is opened.
"Lchk_Wait" : During check.
"Lchk_OK!!" : Disc Tray is opened.
"LchkErr *** " : Error(E ***) is occurred.
All illuminations are lit.
All illuminations can be turned off to push the SELECT knob.
Press the SELECT knob again, all illuminations can be lit.
Q Q
3 6 7 1 3
Adjustment Value indication at
character portions.
0408 ~ 3248
-050 ~ +050
-005 ~ +005
0392 ~ 1569
-025 ~ +025
-005 ~ +005
Starting with the PLAY/PAUSE button, it repeats open/close of the tray and
playback.
All tracks are played back if the track count is less than 20. Only the first and last
tracks are played back if the tracks are more than 21. When any errors, it stops
and indicates error code (see Error Code Table).
Starting with the PLAY/PAUSE button, it repeats open/close of the tray, servo on,
and TOC read.
The display shows the number of the tray operation. When any errors, it stops and
indicates error code (see Error Code Table ).
u163
.
8
2 9 9 4 2 8
Contents
1 5 0 5 8 2 9 9 4
Contents
m
co
DN-D4000 8
9 9
2 8 9 9