Controls And Indicators On The Server Enclosure Rear; Indicator On Hot-Plug Psu; Indicators Of The Server Nodes - Fujitsu PRIMERGY CX400 M4 Operating Manual

Product description
3.3.2 Controls and indicators on the server enclosure
rear
3.3.2.1

Indicator on hot-plug PSU

Figure 9: Indicator on hot-plug PSU
Pos. Indicator
PSU status
1
indicator
3.3.3

Indicators of the server nodes

I
For the description of the indicators of the server nodes, see the
operating manuals of the relevant server nodes.
28
Status Description
flashing The server is switched off, but mains
green voltage is present (standby mode).
The server is switched on and operating
green on
properly.
An overload has been detected. The
flashing
PSU is still running, but failure might be
orange
imminent.
An PSU failure has been detected.
Possible causes:
orange on
– Over/under voltage
– Overheating
– Fan failure
Operating Manual
CX400 M4