Fujitsu PRIMERGY CX400 M4 Operating Manual page 37

When connecting and disconnecting cables, observe the relevant
●
instructions in the "Important Information" chapter of the technical
manual for the corresponding rack. The technical manual is supplied
with the corresponding rack.
When installing the rack, make sure that the anti-tilt mechanism is
●
correctly fitted.
Do not extend more than one server enclosure out of the rack
●
simultaneously even if the tilt protection is in place. If several server
enclosures are simultaneously extended from the rack, there is a risk
that the rack could tip over. See the safety information of the rack and
the warning label.
If the server enclosure/rack is intended for permanent connection to
●
the mains only an authorized specialist (electrician) is allowed to
work.
Please follow the regulation of each country.
If the server enclosure is integrated into an installation that draws
●
power from an industrial power supply network with an IEC309 type
connector, the power supply's fuse protection must comply with the
requirements for non-industrial power supply networks for the type A
connector.
Other important information
During cleaning, observe the instructions in the corresponding Operating
●
Manual chapter "Starting up and operation" > "Cleaning the server
enclosure".
Keep all manuals close to the server enclosure. All documentation must be
●
included if the equipment is passed on to a third party.
CX400 M4
Operating Manual
Important information
37