Table of Contents
Advertisement
ASR900-RSP3C-400-W LED Fault Condition
LED
Sync status (SYNC)
USB flash (MEM)
BITS
ASR900-RSP3C-400-W LED Fault Condition
The PWR and STAT LEDs are available on the front panel. These LEDs provide power on the board (PWR)
and overall router health (STAT) status. During power up state, these LEDs provide booting status and report
errors.
Note
The digital code signing functionality validates the integrity and authenticity of the ROMMON image before
booting it.
Table 34: ASR900-RSP3A-400-W LED
PWR LED
State
Light
Green
Cisco ASR 907 Router Hardware Installation Guide
182
Color/State
Off
Yellow
Flashing
yellow
Green
Flashing green
Off
Amber
Green
STAT LED
Indication
State
Red
Power is OK and the
field-programmable gate array (FPGA)
is nfigured successfully, but FPGA
image validation failed.
Description (two LEDs for each port)
Not enabled
Free run
Holdover
Locked to source
USB activity
Out of service/not configured
Fault or loop condition
In frame/working properly
Comment
Image validation failed. System is in hung
state.
Troubleshooting
Advertisement
Table of Contents
