Using; Maintenance, Cleaning And Storing - Westfalia 62 09 89 Instruction Manual

Operation
Place the work piece on the
base plate against the rear stop
(24) and secure it with the jaw
(23). Make sure the work piece
sits solidly on the base plate.
Adjust both jaws in such a way
that the work piece lies in the
middle of the cutting disc.
Now turn on the angle grinder
and bring the cutting disc down
onto the work piece.
Avoid sharp impacts and apply
even force on the work piece.

Maintenance, Cleaning and Storing

Clean the unit from time to time with a dry paint-brush or a brush in order
to remove residues.
Do not clean the unit with aggressive detergents or aggressive chemicals.
The unit is maintenance-free and does not require any lubrication.
Operation
13