Removal; Repositioning; Maintenance, Cleaning And Storing - Westfalia 85 34 94 Instruction Manual

Removal

 For the removal of the SAC clutch, follow the instructions of the
installation in reverse order. The use of the centring tools is not
necessary.

Repositioning

 When operating the new clutch disc with a used clutch pressure
plate it is necessary to reset the adjusting ring of the clutch
pressure plate.
 Position the pressure piece with the pressure spindle on the
fixing screws and tighten.
 Now use the resetting tool.
 With the aid of the pressure spindle, press the diaphragm spring
of the clutch pressure plate until the adjusting ring moves to the
right.
 Re-position the adjusting ring by turning the resetting tool to the
left.
 Do not exert force on the adjusting ring when applying the
resetting tool.
 Turn back the pressure spindle. Remove the pressure piece, the
pressure spindle, the resetting tool and the fixing screws.

Maintenance, Cleaning and Storing

To prevent serious injury from accidental operation and/or tool
failure:
 Do not use a damaged tool.
 Clean the tool set with a clean dry cloth only. Do not use any
cleaners, solvents, water, or other liquids.
 Store the tool in the carrying case, in a clean and dry location out
of reach of children.
Operation
10