Device Topology Views; Accessing The Device Topology Views; Figure 2-3. Accessing The Device Topology View - Cabletron Systems SPECTRUM FDM Manual

Device Topology Views

Accessing the Device Topology Views

Device Topology Views
The Device Topology (DevTop) View represents a device in terms of its ports
and port connections. The FDM Management Module supports two Device
Topology Views:
• FDM Device Topology View
• Concentrator Device Topology View
Accessing the Device Topology Views
You can access the FDM DevTop View through any of the FDM icons
(Topology, Location, or Off-Page Reference). To access the Concentrator
DevTop View you must first navigate into the FDM DevTop View, then access
the Concentrator DevTop View through the concentrator icon. To access
DevTop views from an FDM or concentrator icon, use one of the following
methods (refer to Figure 2-3):
• Double-click on the DevTop Access Arrow of the icon.
• Highlight the icon and select DevTop from the Icon Subviews menu.
Figure 2-3. Accessing the Device Topology View
Modeling the FDM
2-6
Double-click
BdgCSIFDM
BdgCSIFDM
Close
Navigate
Alarms
Performance
Notes...
Utilities
Zoom
Device
DevTop
Application
Acknowledge
Flash Green Enabled
Configuration
Model Information
Primary Application
Select DevTop
Management Module Guide
FDM