Thermostat Configuration - GE RAK180W1 Owner's Manual & Installation Instructions

Thermostat Configuration

Once the thermostat is powered, thermostat configuration
settings will appear on the thermostat screen.
In order to properly operate the HVAC unit:
• Set the thermostat clock
• Enter the room number
• Configure the equipment settings
• Select Energy Savings Preset (Zoneline custom settings
are the default).
The thermostat configuration screens have a 30-second
time-out. If no action is taken within thirty (30) seconds, the
thermostat will exit configuration settings.
NOTE: You
can access
Thermostat
Configuration
settings at
any time by
pressing the
"Configuration"
button.
NOTE: If the thermostat is connected to a network, the
settings configured online will be applied.
49-5000416 Rev. 0
11