Wireless Installation; Wired Installation - GE RAK180W1 Owner's Manual & Installation Instructions

Wireless Installation

Mounting the thermostat to the wall
• Remove the thermostat cover;
• Use the supplied wall anchors and mounting screws to
secure the thermostat to the wall;
• Insert two (2) AA-cell batteries (not supplied) into the
thermostat battery compartment;
• Follow the "Thermostat Configuration" instructions
starting on page 11.
• Replace the thermostat cover and screw in the locking
screw.

Wired Installation

Mounting the thermostat to the wall
• Connect R & C from HVAC unit to the corresponding
wires on the harness by splicing 24VAC and common
wires from the thermostat into the 24VAC and common
wires to the zoneline.
• Remove the thermostat cover;
• Use the supplied wall anchors and mounting screws to
secure the thermostat to the wall;
• Follow the "Thermostat Configuration" instructions
starting on page 11.
• Replace the thermostat cover and screw in the locking
screw.
10
Thermostat Installation
GL GH OB W R Y C AUX
GL GH OB W R Y C
AUX
R C
F
F
49-5000416 Rev. 0