Configuring The Equipment Settings - Compressor Type - GE RAK180W1 Owner's Manual & Installation Instructions

Thermostat Configuration

Configuring the Equipment Settings - Compressor Type

Compressor Type
Use the "Up" and "Down" buttons to change the compressor
type by changing the first digit
0 - No Compressor
1* - Heat pump
2 - Air Conditioner
• Press the "Fan" button to advance to the next setting;
* Indicates default setting
NOTE: If the Zoneline is an AZ45 model, change the
compressor type to a 2.
14
49-5000416 Rev. 0