Ever Power Systems POWERLINE RT PLUS Series Installation Manuallines page 6

Installation guidelines for the POWERLINE RT PLUS 6-10 kVA units
Table 1. Installation guidelines for the POWERLINE RT PLUS 6 – 10 kVA UPS.
PARAMETERS / MODEL
Apparent / active power
POWER SUPPLY PARAMETERS
Power system topology
Rated voltage
Rated current
Rated frequency input
Minimum input wire size
Mains line
Switch fuse
protection - Fm
OUTPUT PARAMETERS
Output system topology
Rated output voltage
Rated current
Minimum output wire size
Switch
Output line
disconnect
protection
or - Qout
ENVIRONMENTAL PARAMETERS
Heat release under nominal
operating conditions
1)
Operating temperature
Storage temperature
Humidity
Elevation
MECHANICAL PARAMETERS
Dimensions
(height × width × depth)
UPS weight
Minimum operating clearance
Note: The manufacturer reserves the right to change the above parameters without notice.
UWAGI:
1) Constant exposure of the battery module to temperatures of +25°C reduces the battery life. Recommended working
temperature: 15 – 25 °C
2020-03-26 16:15
POWERLINE RT PLUS 6000
6 kVA / 6 kW
27,4 A
4 mm
32 A gG
26,1 A
4 mm
32 A
< 1100 BTU / h
13,3 kg
Pomoc Techniczna, tel.: +48 61 6500 400
POWERLINE RT PLUS
POWERLINE RT PLUS 10 000
1P3W
230 V AC
50 Hz
2
1P3W
230 V AC
2
0 ÷ 40 °C
0 ÷ 40 °C
< 95 %
< 1000 m
86 (2U) x 438 x 573 mm
Front: > 100 mm
Sides: > 100 mm
Back: > 100 mm
10 kVA / 10 kW
45,8 A
2
10 mm
50 A gG
43,5 A
2
10 mm
50 A
< 1800 BTU / h
15,2 kg
www.ever.eu
6