Adjusting your monitor image
This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Note: The direct access controls are coloured.
Table 2-1. Direct access controls
1
2
3
4
5
6
Icon
Control
Volume decrease
Volume increase
Input change
DDC/CI
Exit
Display Mode
Increase/Up
Brightness
Decrease/Down
Menu
Enter
Description
Decrease the volume
Increase the volume
Switches the video input source.
Press and hold for 10 seconds to enable or
disable the DDC/CI function
Exit and return to previous level
Direct access to switch display mode.
Press to move lighting-indicator on main menu
up from active item to last one.
Press to increase current values on adjustment bar
Direct access to Brightness adjustment.
Press to move lighting-indicator on main menu
down from active item to next one.
Press to decrease current values on adjustment
bar
To access OSD menu.
Press to confirm selection.
Press and hold for 10 seconds will lock
menu/un-lock menu.
Press to enter next level on main menu/sub menu
status or enter previous level on adjustment bar.
Chapter 2. 2-3