Adjusting your monitor image
This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1. Direct access controls
2-3 T24i-30 Flat Panel Monitor User's Guide
Icon
Name
Description
Press to open main menu while there is no any OSD on the screen.
•
Press to enter next level on main menu or sub menu , or move
•
Enter key
backwards through the sub menus.
Press and hold for 10 seconds to Lock/un-Lock all menu.
•
It is a shortcut for adjusting Color mode while there is no OSD on
•
the screen.
Right key
Press to enter sub menu.
•
Press to decrease current values on adjustment bar..
•
Press to move backwards through the sub menus.
•
Left Key
Press to increase current values on adjustment bar.
•
It is a shortcut for changing Contrast setting while there is no OSD
•
on the screen.
Down Key
Press to move lighting-indicator on main menu down to next one.
•
Press to decrease current values on adjustment bar
•
It is a shortcut for adjusting Brightness while there is no OSD on
•
the screen.
Up Key
Press to move lighting-indicator on main menu up to last one.
•
Press to increase current values on adjustment bar.
•
It is a shortcut for changing input signal while there is no OSD on
Input Source
the screen or on power-saving mode.
DDC-CI
Press and hold for 10 seconds to Enable/Disable the "DDC/CI".
Turns the monitor on/off. White indicates power on. Orange
Power button
indicates standby/ power saving mode.