Caring For Your Monitor; Detaching The Monitor Stand; Wall Mounting (Optional) - Lenovo Q24h-10 User Manual

Caring for your monitor

Be sure to turn off the power before you perform any maintenance on the monitor.
Do not:
Do:

Detaching the monitor stand

Step 1: Place the monitor on a soft and flat surface.
Step 2: Remove the screws from base before detaching base and stand from the monitor.

Wall Mounting (Optional)

Refer to the instructions that come with the base mounting kit. To convert your LCD display from a
desk-mounted to a wall-mounted display, do the following:
Step 1: Verify that the Power button is turned Off, then disconnect the power cord.
Step 2: Lay the LCD display face down on a towel or blanket.
Step 3: Remove the base from the monitor, refer to "Detaching the monitor base and stand".
Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm x100mm
Step 5: Attach the LCD display to the wall, following the instructions in the wall-mounting kit. For use
Apply water or liquid directly to your monitor.
●
Use solvents or abrasives.
●
Use flammable cleaning materials to clean your monitor or any other electrical
●
equipment.
Touch the screen area of your monitor with sharp or abrasive items. This
●
type of contact may cause permanent damage to your screen.
Use any cleaner which contains an anti-static solution or similar additives. This
●
may harm the coating of the screen area.
Lightly dampen a soft cloth with water and use this to gently wipe the covers and
●
the screen.
Remove grease or finger marks with a damp cloth and a little mild detergent.
●
distance), VESA Mounting Screw M4 x 10 mm.
only with UL&GS Listed Wall Mount Bracket with minimum weight/load: 8kg
Chapter 2. 2-9