Adjusting Your Monitor Image - Lenovo R27fc-30 User Manual

Adjusting your monitor image

This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
1
2
3
4
5
6
7
8
2-4 R27fc-30 Curved Panel Monitor User's Guide
Icon Control
Up
Down
Left
Right
Menu/OK
Key
Source-
selecting
Power
Description
(1)It is a shortcut for adjusting Brightness while there
is no OSD on the screen.
(2)Press to move lighting-indicator on main menu up to
last one.
(3)Press to increase current values on adjustment bar.
(1)It is a shortcut for adjusting Brightness while there
is no OSD on the screen.
(2)Press to move lighting-indicator on main menu
down to next one.
(3)Press to decrease current values on adjustment bar.
(1)It is a shortcut for adjusting volume while there is
no OSD on the screen.
(2)Press to move backwards through the sub menus.
(3)Press to decrease current values on adjustment bar
(1)It is a shortcut for adjusting volume while there is
no OSD on the screen.
(2)Press to enter sub menu.
(3)Press to increase current values on adjustment bar.
(1)Press to open main menu while there is no OSD on
the screen.
(2)Press to enter next level on main menu or sub menu
, or move backwards through the sub menus.
(3)Press and hold for 10 seconds to Lock/un-Lock all
menu.
(1) It is a shortcut for opening the menu of Game mode
while there is not any OSD on the screen.
(1)It is a shortcut for changing input signal while there
is no OSD on the screen or on power-saving mode.
(2)Press and hold for 10 seconds to Enable/Disable the
"DDC/CI" .
Press to turn On/Off the monitor.