Table of Contents
Advertisement
Adjusting your monitor image
This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1 Direct access controls
Using the On-Screen Display (OSD) controls
The settings adjustable with the user controls are viewed through the On-Screen Display (OSD),
as shown below.
To use the controls:
1.
2.
3.
4.
5.
Icon
Control
Microphone Mute
Mute
Input change
Main menu
Press
to open the main OSD menu.
Use
or
to move among the icons. Select an icon and press
function. If there is a sub-menu, you can move between options using
then press
to select that function. Use
to save.
Press
to move backwards through the sub-menus and exit from the OSD.
Press and hold
for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold
and allow adjustments to the OSD.
Enables DDC/CI by default. Use OSD Exit Key, press and hold the
seconds to disable/enable DDC/CI function. The words " DDC/CI
Disable/DDC/CI/Enable" shows on the screen.
Description
Use the Microphone Mute button to mute
microphone.
Use the Mute button to mute audio.
Switches the video input source.
Open main OSD menu
or
to make adjustments. Press
for 10 seconds to unlock the OSD
Chapter 2. Adjusting and Using your monitor 2-6
to access that
or
,
buttons for 10
Advertisement
Table of Contents
