Lenovo Q24h-10 User Manual page 11

7. Connect one end of the USB C-C cable to the USB Type-C connector of the computer, and the
other end to the USB Type-C connector on the monitor, then insert the Adapter into the monitor,
and plug the monitor power cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant national
installation and or equipment regulations shall be considered. A certified power supply
cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227
(designation H05VV-F 3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall be used.
Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation
H05RR-F 3G 0.75mm2) shall be used.
Note:
1. This monitor supports USB-C charging function, please be sure to use the standard 135W
power adapter with the monitor.
2. When using Lenovo non-standard power adapter with power capability below 135W,
Charging NB or other devices by way of USB-C of the monitor, it may cause the monitor to be
powered off because of over-loading protection.
8. Power on the monitor and the computer.
.
Chapter 1 1-5