Selecting A Supported Display Mode - Lenovo Q24h-10 User Manual

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer
documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes. This is normal and
the image can be readjusted using automatic image setup and the image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel
technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently configured to a
Table 2-3.Factory set display modes
Addressability
640x480
720x400
800x600
832x624
1024x768
1280x1024
1366x768
1440 x 900
1680 x 1050
1920 x 1080
1920 x 1200
2560 x 1440
display mode outside the range of this monitor, you may need to re-attach the CRT monitor
temporarily until you have re-configured the system; preferably to 2560x1440 at 60Hz, which is
the Native Resolution Display mode. The display modes shown below have been optimized at
the factory.
Refresh rate
60Hz,72Hz,75Hz
70Hz
56Hz,60Hz,72Hz,75Hz
75Hz
60Hz,70Hz,75Hz
60Hz,75Hz
60Hz
60 Hz, reduced 60Hz
60 Hz, reduced 60Hz
60 Hz
60 Hz
60Hz,75Hz
Chapter 2. 2-7