Test Communications - Ametek Solatron Analytical EnergyLab XM Getting Started

4. Test Communications

Make sure that the
and check that the project name at the top
of the navigation panel is the default
project Getting Started
automatically when XM-studio software is
first installed and run.
Click on the System
the left-hand navigation panel to display
the User Preferences
library as shown.
Click on the Equipment library
the Equipment
initially empty because the software has
not yet located the EnergyLab XM.
Click the Search
software will identify
EnergyLab XM confirming
that the PC is communicating
with the unit:
The default IP addresses of the FRA and Potentiostat in the
EnergyLab XM unit are: 169.254.254.10 and 169.254.254.11
Project tab is selected,
that opens
tab at the bottom of
and Equipment
Summary. This will be
button. The
to display