Advertisement
6. FRA Test
EnergyLab XM includes a
Frequency Response Analyzer
that enables impedance
measurements. The FRA can be
tested without changing cables by
opening the
Additional Tests
folder by clicking on the (+) and
selecting FRA Test.
This displays the Experiment / Run Menu for the default FRA test. As
before the Hardware / Cell Setup and Step Sequence Menus
associated with the FRA test can be examined and changed if
required.
To run the test make sure that EnergyLab XM is selected in the
Experiment / Run Menu, and then click the
Run
key. When the
measurements start the following graphs should appear (graph axes
etc. can be configured as before):
Advertisement
