Table of Contents
Advertisement
Printer Part
Platen Roller
Tear Bar/Peel Bar
Sensor
Exterior
Interior
Note
Do not touch the Print Head. If you have touched it, clean it as described above.
Do not use medical alcohol as it may damage the Print Head. Use isopropyl alcohol
or ethanol according to the manufacturer's safety guidelines, as applicable.
When replacing the media, we recommend cleaning the Print Head.
Cleaning Method
1. Turn the power off.
2. Rotate the Platen Roller and wipe it
thoroughly with a lint-free cloth or
cotton swab dipped in isopropyl
alcohol or ethanol.
Wipe it with a lint-free cloth dipped in
isopropyl alcohol or ethanol.
Use compressed air or vacuum.
Wipe the printer exterior with a lint-free
cloth dipped in water.
Use a brush or vacuum.
57
Interval
Clean the Platen Roller
when changing a new label
roll.
As needed
Monthly
As needed
As needed
Advertisement
Table of Contents
