Problem
Lack of suction.
No milk being
expressed.
Pain in the
breast area when
expressing.
Milk is leaking out
from the massage
cushion or
remaining on the
cushion.
22
EN
Solution
Check that all components are assembled
•
correctly and that the valve is in positioned
correctly.
Make sure that the massage cushion is
•
locked to the end-position of the funnel.
Make sure that the cap, the diaphragm,
•
and the massage cushion are fitted
securely to the pump body and a perfect
seal is created.
The air pressure in your region is too low,
•
this may affect the suction.
Make sure the silicone tube is firmly
•
connected to the cap and the motor,
without twisting.
Make sure the pump is assembled
•
correctly, and the suction is created.
Relax and try again; as expression may
•
improve with practice.
Refer to the "Hints to help you succeed"
•
section.
You may be pumping too hard. You do not
•
need to use all the suction that the pump
can generate but the comfortable levels.
Press the level down button to lower down
the suction intensity.
Consult your health professional/ breast
•
feeding advisor.
Remove and refit the massage cushion.
•
Make sure that it is installed correctly and
firmly.
Do not lean backward in excess when
•
pumping.