Table of Contents
Advertisement
Note
You do not need to use
•
all stimulation/expression
levels, only use the levels
that are comfortable for you.
Place the pump motor on
•
a stable and flat surface, to
avoid any accidental drops
when in use. If not, this may
pull the pump body off from
the breast and cause injury.
If you regularly express more
•
than 125ml per session on
each breast, you can use a
260ml/9fl oz Philips Avent
bottle to prevent overfilling
and spillage.
If there is no operation on
•
this appliance (such as
pause, change stimulation
level and expression level)
for 30 minutes (including in
pause), the appliance will
shut down automatically.
7
When you have finished
expressing, press the power
button (
) to switch off the
breast pump and carefully
remove the pump body from
your breast.
Tip
After switching off the
•
breast pump, break the seal
between the breast and the
pump funnel with your finger,
and then remove the pump
from your breast.
16
EN
8
Disconnect the the power
plug to the power socket,
and then disconnect the
power adapter from the
pump motor.
1
2
Tip
In order to protect the
•
appliance, please always
shut down the appliance by
pressing the power button
instead of plugging off.
9 Unscrew the bottles from
the pump bodies ready
for feeding/storage. Clean
the other used parts of the
breast pump according to
the instructions in chapter
"Cleaning and sterilising".
Caution
Never tilt the breast pump
•
when the milk has reached
the maximum line on the
bottle. Replace with a new
bottle before re-pumping to
avoid spillage.
After expression, please take
•
off the bottle from pump
body immediately, then store
the bottle with sealing disc.
Advertisement
Chapters
Table of Contents
