Final Inspection - Bowflex SelectTech 2080 Installation Manual

5. Adjust Base End Shrouds
In order to avoid possible serious injury, when placing the Weight Plates in the Base Assembly, be careful
to avoid fingers or hands being caught or pinched.
Note: Push the shrouds inward. Tighten the inner screws. To tighten the outer screws, it may be necessary to remove
the Barbell and Weight Plates. This adjustment is important for proper function and easier re-racking. If the barbell
is difficult to re-rack after assembly, it may be necessary to repeat this process.

6. Final Inspection

Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance
with the Owner's Manual.
EN
X2
6mm
X2
6mm