Table of Contents
Advertisement
3.1.3. Configure Interface to SES
3.1.3.1 Specify IP node names
Use the change node-names ip command to define the address of the "clan" interface and the
Avaya SIP Enablement Services server.
change node-names ip
Name
clan
192.168.60.6
default
0 .0 .0 .0
ipsi
192.168.60.5
medpro
192.168.60.7
procr
ses
192.168.200.100
3.1.3.2 Configure Signaling Group for the SIP Trunk Interface to SES
Use the add signaling-group <x> command, where <x> is a free signaling group number, to
create a signaling group which is to be used to connect to the SES. Accept defaults for
parameters, except for those which are highlighted.
Parameter
Group Type
Transport Method
Near-end Node Name
Near-end Listen Port
Far-end Node Name
Far-end Listen Port
Far-end Domain
Direct IP-IP Audio
Connections
Table 3: Configuration Signaling Group for SIP Interface to SES
MRR; Reviewed:
SPOC 12/13/2007
IP NODE NAMES
IP Address
.
.
.
Figure 4: Node-Names IP Form
Enter "sip" to specify a SIP trunk.
Enter "tls" to specify that Transport Layer Security should be used to
encode data information flow on this signaling group.
Enter "clan" to use the CLAN interface on the S8500, which was
assigned in Figure 4
Accept the default of "5061" to specify the standard TLS listen port.
Enter "ses" to specify the SES server name assigned in Figure 4.
Accept the default of "5061" to specify the standard TLS listen port.
Enter the domain name which is configured for SES, configured in
Figure 13.
Enter "y" to specify that direct IP-IP audio connections should be used.
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
Name
IP Address
.
.
.
.
.
.
Usage
Page
1 of
1
.
.
.
.
.
.
.
.
.
.
.
.
5 of 23
FreiTel-SIP
Advertisement
Table of Contents
