PHILIPS Respironics InnoSpire Elegance Manual page 4

Hide thumbs Also See for InnoSpire Elegance:
Table of Contents

Advertisement

Available languages

Available languages

• It is recommended to have a backup device (e.g. MDI or battery operated compressor) for respiratory delivery in case a situation arises when your nebulizer cannot be used (e.g. during a power
outage or if your compressor becomes inoperable for any reason).
• If the device has been outside of the operating conditions, allow to come back to normal operating specifications before use.
• Any liquid spilled on or inside the unit should be allowed to dry before operating.
Use the product in a clean environment; one that is free from dirt, dust, pet hair, etc.
3
Device should not be used around flammable substances, or in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
4
No modification of this equipment is allowed.
5
It is normal for the device to be warm to the touch when in use.
6
Do not stack the compressor with other equipment.
7
Electromagnetic information: Portable and RF communication devices such as cellular phones,
8
pagers, etc. can interrupt operation of electrical medical equipment. For this reason, your
compressor must be placed far enough away from these devices to prevent interference. This
device meets IEC60601-1-2 standard for electromagnetic compatability (EMC). EMC data sheets
are available from Philips Respironics customer service at (inside the US) +1-800-345-6443
(outside the US) +33 1 47 52 30 00
.
In case of failure and/or malfunction, read the "Troubleshooting" section. Do not open the
9
compressor housing as this is not a serviceable product.
The proper function of the device can be compromised if original replacement parts (e.g., filters)
10
are not used
.
Risk of electric shock do not remove back.
Do not use the device without the filter.
11
When using any electrical appliance, certain important safety measures must always be
12
followed, including the following:
• Use only manufactured-supplied original accessories and components;
Never submerge the unit in water as the device is not protected against water penetration;
Never touch the unit when your hands are wet or moist
Do not leave the unit outdoors;
Place on a stable and horizontal surface when operating;
Make sure the air vent openings are not obstructed
Keep this manual for future reference.
2
;
;
Do not allow unsupervised children or infirm individuals to use the unit;
Do not turn off the unit by simply pulling out the plug from the electrical outlet;
Do not use in a ventilator circuit;
Do not use if the device has cracks or is damaged.
Make sure that the electrical rating shown on the rating label on the bottom of the unit
13
corresponds to your main voltage and frequency before plugging in the device.
Do not use any adapter, simple or multiple, and/or extension cord.
14
Do not leave the unit plugged in when not in use. Unplug the device from the electrical
15
outlet when not in operation.
Follow the manufacturer's instructions for installing the device.The manufacturer cannot be
16
held responsible for any damage caused by incorrect installation.
The power supply cord cannot be replaced by the user. In case the power supply cord becomes
17
damaged, contact Philips Respironics customer service for replacement (there is no service
.
option)
Before performing any cleaning operation or filter replacement, disconnect the device from
18
the main supply by unplugging it.
Some parts are small enough to be swallowed by children. Do not let unattended children
19
have access to the unit.
If you no longer use the device, dispose of according to the local regulations in force
20
Remember to:
21
• Use this device only with medications prescribed by your doctor;
• Use the accessories recommended by your doctor.
ENGLISH
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents