Toshiba OIS PLUS Series User Manual page 88

The chart below shows the value for which HSC can RUN in different modes.
Normal Config
r
Normal Input
HSC Single phase UP Counter
Quadrature 1X mode
Quadrature 2X mode
Quadrature 4X mode
4. Set preset value [number up to which user wants to count] as shown below:
5. Set soft gate to ON as shown below:
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
HSC Condition
Forced O/P ON preset reach
Forced O/P OFF preset reach,
ON when enable
Forced O/P ON preset reach
Forced O/P OFF preset reach,
ON when enable
Forced O/P ON preset reach
Forced O/P OFF preset reach,
ON when enable
Forced O/P ON preset reach
Forced O/P OFF preset reach,
ON when enable
Value in config register
0
2
258
3
259
67
323
131
387