Voltage Regulation - Tripp Lite SMART5000XFMRXL Specifications

Recommended Electrical
Service
BATTERY
Full load runtime
(minutes)
Half load runtime
(minutes)
Expandable battery
runtime
External battery pack
compatibility
DC system voltage (VDC)
Battery recharge rate
(included batteries)
Replacement battery
cartridge (internal UPS
battery replacement)
Battery Access
Battery replacement
description

VOLTAGE REGULATION

Voltage regulation
description
Overvoltage correction
Undervoltage correction
LEDS ALARMS & SWITCHES
LED Indicators
Alarms
Alarm cancel operation
Switches
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
UPS AC suppression
response time
EMI / RFI AC noise
suppression
PHYSICAL
Installation form factors
supported with included
accessories
Installation form factors
supported with optional
accessories
Primary form factor
30A 208V
8.5 min. (3750w)
20 min. (1875w)
Extended runtime supported via optional external battery packs
BP48V60RT-3U (multi-pack compatible)
48
Less than 4 hours from 10% to 90%
RBC94-3U (quantity 3)
Front panel battery access door
Hot-swappable, user replaceable batteries
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 167 to 260
Input voltages between 228 and 260 are reduced by 12%
Input voltages between 167 and 194 are boosted by 12%
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Audible alarm indicates power-failure, overload and low-battery conditions
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
2 Switches control off/on power status and alarm-cancel/self-test operation
1020
Instantaneous
Yes
4 post 19 inch rackmount (mounting rail kit included)
2 post rackmount (2POSTRMKITWM); Tower (2-9USTAND)
Rackmount