Table of Contents
Advertisement
Quick Links
Owner's Manual
OmniSmart
120V Input/Output, Line-Interactive UPS Systems
UL1778
Important Safety Instructions
Quick Installation
Basic Operation
Storage & Service
Specifications
Español
Français
OmniSmart
™
1111 W. 35th Street Chicago, IL 60609 USA
Customer Support: (773) 869-1234 • www.tripplite.com
©
Copyright
2003 Tripp Lite. All rights reserved.
is a trademark of Tripp Lite. SmartPro
™
& SmartPro
®
is a registered trademark of Tripp Lite.
®
USB
2
3
4
7
8
9
17
Advertisement
Table of Contents
Related Manuals for Tripp Lite OmniSmart & SmartPro USB
Summary of Contents for Tripp Lite OmniSmart & SmartPro USB
-
Page 1: Important Safety Instructions
Basic Operation Storage & Service Specifications Español Français Customer Support: (773) 869-1234 • www.tripplite.com OmniSmart is a trademark of Tripp Lite. SmartPro ™ ™ & SmartPro 1111 W. 35th Street Chicago, IL 60609 USA © Copyright 2003 Tripp Lite. All rights reserved. - Page 2 • Do not use extension cords to connect the UPS to an AC outlet. Your warranty will be voided if anything other than Tripp Lite surge suppressors are used to connect your UPS to an outlet. • If the UPS receives power from a motor-powered AC generator, the generator must provide clean, filtered, computer-grade output.
-
Page 3: Quick Installation
Quick Installation Connect your UPS to an electrical outlet. Your UPS will run a self-test after it is plugged in. See Basic Operation to understand the results of its self-test. Plug your computer, monitor and other equipment into the UPS system. Your UPS is designed to support only comput- er equipment. -
Page 4: Basic Operation
Quick Installation These connections are optional. Your UPS will function properly without these connections. Phone Line/Network Line Surge Suppression (Select models only) Your UPS has either jacks which protect against surges over a phone or network dataline or jacks which protect against surges on a phone line only. - Page 5 “ test; if this happens, let UPS charge its batteries for 12 hours and repeat the test. If the condition persists, contact Tripp Lite for service. CAUTION: Do not unplug your UPS to test its batteries. This will remove safe electrical grounding and may introduce a damaging surge into your network connections.
- Page 6 UPS’s battery is weakly charged. If it remains lit after you have allowed the UPS to charge for twelve hours and have run a second self-test, contact Tripp Lite for service. OVERLOAD (Select models only): This red light will turn ON continuously when the UPS is providing power from battery or after the UPS runs a self-test to indicate that the UPS’s inverter is overloaded.
-
Page 7: Storage And Service
Service If returning your UPS for service, contact your local Tripp Lite dealer or distributor. They will refer you to a service center. Please carefully pack the UPS using the ORIGINAL PACKING MATERIAL that came with the unit. -
Page 8: Specifications
4. If you experience trouble with this Fax/Modem Protector, please contact Tripp Lite Customer Support, 1111 W. 35th Street, Chicago, Illinois 60609; Phone (773) 869-1234 for repair/warranty information. The telephone company may ask you to disconnect this equipment from the network until the problem has been corrected or you are sure that the equipment is not malfunctioning. - Page 9 1111 W. 35th Street, Chicago, IL 60609 USA 773.869.1234 (USA) • 773.869.1212 (International) www.tripplite.com 200306109 93-2141_EN...