Wiring - Siemens SIMATIC ET 200L Manual

Wiring

Introduction
The ET 200L distributed I/O device has been designed for simple wiring. To
this end, the label of the ET 200L distributed I/O device has been made self-
explanatory.
In this chapter, you will find additional information on wiring the ET 200L
distributed I/O device.
Procedure The wiring of the ET 200L distributed I/O device involves several steps. We
suggest you adhere to the following sequence:
Important infor- 1. General rules and regulations
mation on wiring mation on wiring
2. Configuring the electrical installation
3. Wiring rules
Wiring the 1. Wire the ET 200L TB 16L/TB 32L terminal block
ET 200L
Contents of the
Section
Chapter
ET 200L Distributed I/O Device
EWA-4NEB 780600902-05
Procedure
3.1 General Rules and Regulations
3.2 Configuring the Electrical Installation
3.3 Wiring Rules
3.4 Wiring the ET 200L TB 16L/TB 32L Terminal Block
Section
Topic
3
3.1
3.2
3.3
3.4
Page
3-2
3-4
3-8
3-10
3-1