Siemens SIMATIC ET 200L Manual page 48

General Technical Data
6.1 Standards and Certification
Introduction This chapter contains information the following for the modules and compo-
nents of the ET 200L:
S
S
IEC 1131 The ET 200L distributed I/O device meet the requirements and criteria of
IEC 1131, Part 2.
PROFIBUS DP The ET 200L distributed I/O device meet the requirements and criteria of
IEC 61784-1:2002 Ed1 CP 3/1.
CE Marking Our products fulfill the requirements and safety objectives of the following
EC Directives and comply with the harmonized European standards (EN)
published for stored-program controllers in the official journals of the Euro-
pean Communities:
S
S
The EC Declarations of Conformity are available to the relevant authorities
at the following address:
PNO The ET 200L has the following PNO certificates:
Product Name
ET 200L 16 DI DC 24 V
ET 200L 32 DI DC 24 V
ET 200L 16 DO DC 24 V/0.5 A
ET 200L 32 DO DC 24 V/0.5 A
ET 200L 16 DI/16 DO DC 24 V/0.5 A 6ES7 133-1BL01-0XB0
6-2
The most important standards complied with by the ET 200L
The certification of the ET 200L
89/336/EEC Electromagnetic Compatibility Directive
73/23/EEC Low Voltage Directive (for electrical equipment)
Siemens Aktiengesellschaft
Bereich Automatisierungstechnik
A&D AS E 14
Postfach 1963
D-92209 Amberg
Order Number
6ES7 131-1BH01-0XB0
6ES7 131-1BL01-0XB0
6ES7 132-1BH00-0XB0
6ES7 132-1BL00-0XB0
Release PNO Certificate
1 Z00179
1 Z00180
1 Z00181
1 Z00182
1 Z00183
ET 200L Distributed I/O Device
EWA-4NEB 780600902-05